If you have been reading about method validation and want a single page that covers the useful parts, this is it: definitions, context, how it is studied, and the questions that come up repeatedly.
Last reviewed on 2025-09-12. Where a claim depends on a specific study, the study is described rather than over-claimed.
Routine HPLC testing compares a sample result with a calibration curve prepared from known reference standards. Peak area or peak height is plotted against concentration, and the curve is used to estimate unknown amounts. Retention time supports tentative identification when compared with a standard, though mass spectrometry or another confirmatory method may be needed for definitive identification. Pre-run checks verify repeatability, resolution, and peak symmetry before sample analysis. Limits of detection and quantification describe the smallest amounts that can be reliably observed or measured. Sample preparation, filtration, and degassing help prevent column damage and inconsistent results.
High-performance liquid chromatography is an analytical technique that separates components in a liquid sample. A pump moves a liquid mobile phase through a column packed with a solid stationary phase. Compounds interact differently with both phases and travel at different rates, leaving the column at distinct retention times. A detector records these arrivals as peaks on a chromatogram. The resulting pattern supports identification and quantification of substances in mixtures. Modern instruments use high pressure to force solvent through small particles, which improves speed and resolution compared with older low-pressure liquid chromatography methods.
Several separation modes exist, including reversed-phase, normal-phase, ion-exchange, size-exclusion, and hydrophilic interaction liquid chromatography. Reversed-phase uses a nonpolar stationary phase with a polar mobile phase and is widely applied to small organic molecules. Gradient elution changes mobile phase composition during the run, while isocratic elution keeps it constant. Column chemistry, particle size, temperature, flow rate, and mobile phase pH all influence retention and resolution. Method development selects conditions that separate analytes from matrix components and from each other.
Detection commonly uses ultraviolet-visible absorbance, fluorescence, refractive index, or mass spectrometry. Ultraviolet detection depends on molecular chromophores that absorb light at specific wavelengths. Mass spectrometry provides mass information and sensitive quantification, often after electrospray ionization. Before sample batches, performance checks examine resolution, elution time repeatability, peak symmetry, and plate count. Matrix effects and co-elution remain recognized uncertainties; formal validation studies and orthogonal detection help address them. Detector choice depends on analyte properties and required sensitivity.
| Property | Value | Notes |
|---|---|---|
| Common abbreviation | HPLC | High-performance liquid chromatography |
| Separation basis | Differential partitioning | Between liquid mobile phase and solid stationary phase |
| Common mode | Reverse phase | Nonpolar column, polar mobile phase |
| Typical detector | UV-Vis absorbance | Widely used for compounds with chromophores |
| Typical column particle size | 2–5 µm | Smaller particles can improve resolution |
In quality control laboratories, HPLC testing supports batch release, raw material checks, stability studies, and impurity profiling. A validated method defines sample preparation, instrument settings, calibration, and acceptance criteria. Analysts compare results with specifications and investigate out-of-specification outcomes before a batch is approved. Documentation includes chromatograms, integration records, audit trails, and reagent details. Because results influence product decisions, laboratories follow formal quality systems and data integrity rules. The exact tests and limits depend on the material, its intended use, and the applicable regulatory framework.
Method validation examines whether an HPLC procedure is suitable for its intended purpose. Common parameters include accuracy, precision, specificity, linearity, range, detection limit, quantification limit, and robustness. Accuracy describes closeness to a true or accepted value, while precision describes agreement among repeated measurements. Specificity shows whether the method can measure the analyte without interference from related substances. Robustness tests small deliberate changes in flow, temperature, or solvent composition. Validation is not a one-time event; methods may need partial revalidation after changes to instruments, columns, sample handling, or specification limits. Regulatory guidance provides frameworks, but some details remain method-specific.
Method validation evaluates accuracy, precision, specificity, linearity, range, detection limit, quantitation limit, and robustness. Regulatory guidance for pharmaceuticals, foods, and environmental testing defines expected documentation and acceptance criteria. Verification confirms that a validated method works in a specific laboratory with its own instruments and reagents. Calibration curves use reference standards with known purity and traceability, while measurement uncertainty is estimated from validation data, control charts, and collaborative studies. The scope of validation depends on the method's intended use.
Routine quality control monitors retention time shifts, baseline noise, system pressure, and peak shape. Trends can reveal column aging, mobile phase preparation errors, detector drift, or sample degradation. Corrective actions may include replacing the column, preparing fresh mobile phase, or recalibrating the detector. Stability testing often uses HPLC to measure parent compound loss and degradation product formation. Open questions remain about how accelerated stability results extrapolate to long-term storage under varied conditions.
Quality control for HPLC testing combines scheduled checks, documented procedures, and review of results. Before sample analysis, system suitability testing confirms that the instrument, column, and method meet predefined criteria. Common criteria include resolution between critical peaks, retention time precision, peak tailing, and theoretical plate count. Failure triggers investigation before results are reported. Records link raw data, calculations, instrument logs, and analyst identity to each batch, supporting audits and repeat analysis.
HPLC testing separates dissolved compounds by passing a liquid sample through a column packed with stationary phase. A pump delivers mobile phase at controlled flow, and the sample components interact differently with stationary and mobile phases. Compounds that spend more time in mobile phase elute earlier; those retained by stationary phase elute later. Detectors record elution as peaks, and peak area or height relates to amount. This mechanism underpins quantitative analysis of mixtures.
Most routine HPLC testing uses reversed-phase columns, where the stationary phase is nonpolar and the mobile phase is a polar mixture such as water with an organic solvent. Analytes partition between the two phases according to polarity, size, and charge. Gradients that change solvent composition over time can separate compounds with broad retention ranges. Isocratic conditions keep solvent composition constant and suit simpler mixtures. The choice of column chemistry, pH, and temperature affects selectivity and peak shape.
Detection in HPLC testing commonly relies on ultraviolet-visible absorbance, fluorescence, refractive index, or mass spectrometry. UV detection is widely used because many organic compounds absorb light, but it requires a chromophore. Mass spectrometry provides mass-based identification and high sensitivity for trace analytes. Each detector has trade-offs in selectivity, cost, and compatibility with mobile phases. Quantification typically uses calibration curves prepared from reference standards. Results are reported as concentration, purity, or presence above a limit.
Separation modes differ by the chemistry of the stationary phase and the composition of the mobile phase. Reversed-phase testing uses a nonpolar column and polar solvents, making it common for pharmaceutical, environmental, and food analytes. Normal-phase testing uses a polar column and nonpolar solvents for compounds that are poorly retained in reversed-phase systems. Ion-exchange and ion-pair methods separate charged species, while size-exclusion methods sort molecules by hydrodynamic volume. Gradient elution changes solvent strength over time to resolve complex mixtures, and isocratic elution holds solvent composition constant for simpler assays.
Key performance measures include retention time, peak area, peak height, resolution, tailing factor, and plate count. Retention time helps identify a peak under fixed conditions, but confirmation often requires a second method or detector. Peak area and height relate to concentration through calibration curves, which may be linear or nonlinear depending on the detector response. Resolution describes separation between adjacent peaks, while tailing factor and plate count describe peak shape and column efficiency. Performance checks verify these values before and during a run to confirm that the instrument is performing within limits.
High-performance liquid chromatography testing separates components of a liquid sample by forcing a mobile phase through a packed column. The stationary phase inside the column interacts with analytes to different degrees, so each compound exits at a characteristic retention time. A pump delivers solvent at controlled flow and pressure, while an injector introduces a precise sample volume. Detectors such as ultraviolet-visible, fluorescence, refractive index, or mass spectrometric instruments record the separated bands. The resulting chromatogram provides qualitative and quantitative information about the mixture.
== Diagnosis == Fasting Insulin levels in blood may be measured as this can be elevated in the presence of normal glucose. Diagnosis is often made by checking normal levels of glucose that exceed 1.7 mmol/L (30 mg/dL) when 1 mg of glucagon is administered IM or IV. In addition, urine samples or blood samples are also used to check levels of ketones and low free fatty acids. After diagnosis, most people are required to continue regular check ups for evaluations.
== Use in agriculture == Research conducted by the American Cyanamid laboratories in the late 1940s and early 1950s demonstrated that adding penicillin to chicks' feed increased their weight gain by 10 per cent. The reasons for this were still subject to debate in the twenty-first century. Subsequent research indicated that adding penicillin to animal feed also improved feed conversion efficiency, promoted more uniform growth and facilitated disease control. After the Food and Drug Administration (FDA) approved the use of penicillin as feed additives for poultry and livestock in 1951, the pharmaceutical companies ramped up production to meet the demand.
Language enhancements (including NULL, abstract classes and methods, covariants and finals, closures in tags, and more) Asynchronous programming, using Futures Command line REPL Auto lockdown capability Distributed cache support (Redis, memcached, JCS) REST playground capability Modernized Admin UI Performance Monitoring Toolset
Space and Strategic Defense Command SSDD (i) Same Shit, Different Day Single-Sided Double-Density (floppy disk) SSE (s) South-southeast (i) Streaming SIMD Extensions SSG – (s) Guided Missile Submarine (retired US Navy hull classification) SSGN – (s) Nuclear-Powered Guided Missile Submarine (US Navy hull classification) SSH – (i) Saffir-Simpson Hurricane scale SSK – (s) Hunter-Killer Submarine (retired US Navy hull classification) SSKP – (i) Single-Shot Kill Probability SSL – (i) Secure Sockets Layer SSM – (i) Surface-to-Surface (Guided) Missile SSN (s) Nuclear-Powered Attack Submarine (US Navy hull classification) (i) SIM Serial Number Social Security Number (U.S.) Socialist Solidarity Network Subsystem number (SCCP, SS7) SSNW – (i) Same Shit, New Wrapping SSO – (s) Submarine Oiler (retired US Navy hull classification) SSP – (s) Submarine Transport (retired US Navy hull classification) SSR (s) Radar Picket Submarine (retired US Navy hull classification) (i) Solid State Recorder SSRI (i) Selective Serotonin Reuptake Inhibitor Social Systems Research Institute SSRN (i) Social Science Research Network (s) Nuclear-Powered Radar Picket Submarine (retired US Navy hull classification) SSS (i) Siding Spring Survey Side Side Side (an acronym for remembering congruent triangles) (i) Sigue Sigue Sputnik (band) S/SSM – (i) Surface-to-Subsurface Missile SST (i) SuperSonic Transport (s) Training Submarine (US Navy hull classification) Saturated Suction Temperature (refrigeration cycles) SSTO – (i) Single-Stage To Orbit SSV – (i) Soft-Skinned Vehicle (i.e., unarmoured) ssw – (s) Swati language (ISO 639-2 code) SSW – (s) South South-West
Sources: en.wikipedia.org
=== Sales === Counter-Strike became the first fan-made video game to be released commercially. By July 2001, global retail sales of the game had surpassed 250,000 units. By October 2002, sales had exceeded 1.3 million copies. Sales continued to rise, reaching 1.5 million units and generating $40 million in revenue by February 2003. By August 2004, Counter-Strike had grossed $75 million in revenue and had an estimated two million players worldwide. In the United States, its retail version sold 550,000 copies and earned $15.7 million by August 2006, making it the 22nd best-selling PC game in the country between January 2000 and August 2006. The Xbox version of the game sold 1.5 million copies. As of December 2008, Counter-Strike had sold approximately 4.2 million copies, surpassing all other Valve games except Half-Life and Half-Life 2. A portion of Half-Life sales is often attributed to Counter-Strike since the game was originally available as a modification of Half-Life. Half-Life experienced an unusual increase in sales year-over-year following its release, which Gabe Newell attributed to the popularity of Counter-Strike. He described the release of the mod as one of the best things that could have happened to Half-Life.
==== Temperature reconstruction ==== Isotopic composition of precipitation can be used to infer changes in air temperature based on the Rayleigh process. Lower temperature corresponds to lower saturation vapor pressure, which leads to more condensation that drives the residual vapor toward isotope depletion. The resulting precipitation thus has a more negative δD and δ18O value at lower temperature. This precipitation isotope thermometer is more sensitive at lower temperatures, and widely applied at high latitudes. For example, δD and δ18O were found to have a temperature sensitivity of 8‰/°C and 0.9‰/°C in Antarctic snow, and a sensitivity of 5.6‰/°C and 0.69‰/°C across Arctic sites. δD and δ18O of ice cores in Greenland, Antarctica and alpine glaciers are important archives of temperature change in the geological past.
In 1897, portions of an octopus, said to have been more gigantic than any ever before seen, were washed up on the beach at St. Augustine. Prof. Verrill, of Yale University, who examined the remains, which alone reputedly weighed over six tons, calculated that the living creature had a girth of 25 feet and tentacles 72 feet in length! He learned that a sample of the integument was preserved in the Smithsonian Institution, and persuaded the curators to send a portion of the sample to his colleague, Dr. Joseph F. Gennaro Jr., a cell biologist at the University of Florida. Gennaro compared the connective tissue of the St. Augustine carcass to control specimens from known octopus and squid species. He published his findings in the March 1971 issue of Natural History:
Sources: en.wikipedia.org
==== Dance/movement therapy ==== Dance and movement therapy, as a form of active imagination, was developed by Jung and Toni Wolff in 1916 and practiced by Tina Keller-Jenny and other analysts. It remained largely unknown until the 1950s when it was rediscovered by Marian Chace and therapist Mary Whitehouse. Whitehouse, after studying with Martha Graham and Mary Wigman, became a dancer and teacher of modern dance, and, along with Swiss dancer Trudi Schoop, is considered one of the founders of dance/movement therapy in the U.S.
== See also == Timeline of computing 2020–present Pandemic prevention § Surveillance and mapping COVID-19 surveillance Teamwork Open-source software development Citizen science § COVID-19 pandemic Information management COVID-19 pandemic#Information dissemination Open-source ventilator Bioinformatics Impact of the COVID-19 pandemic on science and technology#Computing and machine learning research and citizen science Public health mitigation of COVID-19 § Information technology Technology policy
=== Changes in menus === To make MREs more palatable to service members and match ever-changing trends in popular tastes, the military is constantly seeking feedback to adjust MRE menus and ingredients. In the following list, only main entrees are listed. Vegetarian menus are marked and footnoted on their first appearance.
===== MeSH D08.811.520.232 – carbon-nitrogen lyases (EC 4.3) ===== MeSH D08.811.520.232.300 – amidine-lyases MeSH D08.811.520.232.300.200 – adenylosuccinate lyase MeSH D08.811.520.232.300.400 – argininosuccinate lyase MeSH D08.811.520.232.300.400.500 – delta-crystallins MeSH D08.811.520.232.400 – ammonia-lyases MeSH D08.811.520.232.400.200 – aspartate ammonia-lyase MeSH D08.811.520.232.400.350 – ethanolamine ammonia-lyase MeSH D08.811.520.232.400.500 – histidine ammonia-lyase MeSH D08.811.520.232.400.600 – l-serine dehydratase MeSH D08.811.520.232.400.700 – phenylalanine ammonia-lyase MeSH D08.811.520.232.400.850 – threonine dehydratase
Sources: en.wikipedia.org
HPLC testing measures the presence and amount of one or more compounds in a liquid sample. It separates mixture components and records detector responses as peaks, which are compared with reference standards. Results are usually reported as concentrations or relative percentages.
Retention time is the interval between sample injection and the detector response for a given compound. It depends on the compound's interactions with the stationary and mobile phases under set conditions. Matching a retention time to a standard supports tentative identification but is not always unique.
HPLC alone can separate unknown compounds and provide retention times, but it often cannot identify them with certainty. Coupling HPLC to mass spectrometry gives mass information that improves identification. Confirmation usually requires comparison with reference standards or complementary techniques.
HPLC separates and quantifies compounds in a liquid sample. Detectors produce a response proportional to the amount of a compound passing through the flow cell. Identification by retention time requires comparison with a known standard.