A practical reference on Retention time: what it is, how it behaves, what the literature reports, and where the honest uncertainties sit.
This page was last updated on 2026-06-01 and is reviewed periodically as new material appears.
High-performance liquid chromatography is an analytical technique that separates components in a liquid sample. A pump moves a liquid mobile phase through a column packed with a solid stationary phase. Compounds interact differently with both phases and travel at different rates, leaving the column at distinct retention times. A detector records these arrivals as peaks on a chromatogram. The resulting pattern supports identification and quantification of substances in mixtures. Modern instruments use high pressure to force solvent through small particles, which improves speed and resolution compared with older low-pressure liquid chromatography methods.
Separation in HPLC depends on the chemistry of the stationary phase, the composition of the mobile phase, and the physical properties of the column. Reverse-phase separations use a nonpolar stationary phase and a polar mobile phase, and they are common for many organic compounds. Ion-exchange, size-exclusion, and normal-phase modes serve other classes of analytes. Gradient elution changes solvent strength over time, while isocratic elution holds it constant. Flow rate, temperature, particle size, and column length all influence peak shape and resolution. Detection may use ultraviolet absorbance, fluorescence, refractive index, or mass spectrometry, depending on the analyte and the required sensitivity.
Most routine HPLC testing uses reversed-phase columns, where the stationary phase is nonpolar and the mobile phase is a polar mixture such as water with an organic solvent. Analytes partition between the two phases according to polarity, size, and charge. Gradients that change solvent composition over time can separate compounds with broad retention ranges. Isocratic conditions keep solvent composition constant and suit simpler mixtures. The choice of column chemistry, pH, and temperature affects selectivity and peak shape.
Detection in HPLC testing commonly relies on ultraviolet-visible absorbance, fluorescence, refractive index, or mass spectrometry. UV detection is widely used because many organic compounds absorb light, but it requires a chromophore. Mass spectrometry provides mass-based identification and high sensitivity for trace analytes. Each detector has trade-offs in selectivity, cost, and compatibility with mobile phases. Quantification typically uses calibration curves prepared from reference standards. Results are reported as concentration, purity, or presence above a limit.
| Property | Value | Notes |
|---|---|---|
| Common abbreviation | HPLC | High-performance liquid chromatography |
| Separation basis | Differential partitioning | Between liquid mobile phase and solid stationary phase |
| Common mode | Reverse phase | Nonpolar column, polar mobile phase |
| Typical detector | UV-Vis absorbance | Widely used for compounds with chromophores |
| Typical column particle size | 2–5 µm | Smaller particles can improve resolution |
HPLC testing is not a single fixed procedure; it is a family of separation modes. Reversed-phase, normal-phase, ion-exchange, size-exclusion, and affinity chromatography each suit different analyte properties. Reversed-phase methods dominate because they handle many neutral and moderately polar compounds. Detection can be optical, electrochemical, or mass spectrometric, and the detector dictates what information is available. Coupling with mass spectrometry increases selectivity and enables identification when standards are unavailable. The technique cannot separate every mixture without adjustment.
HPLC testing is an analytical technique used to separate, identify, and quantify components in a liquid sample. It relies on a pressurized mobile phase that carries the sample through a column packed with stationary phase. Different compounds travel at different rates because of interactions with the stationary and mobile phases. The resulting signal versus time is a chromatogram. Peak position indicates identity under specified conditions, while peak area or height relates to amount.
Laboratories apply HPLC testing across pharmaceutical, food, environmental, and industrial chemistry. The method can measure active ingredients, impurities, additives, preservatives, and degradation products. Sample preparation often includes dilution, filtration, and sometimes extraction or derivatization. The choice of column, mobile phase, pH, temperature, and detector depends on the analytes and matrix. Results are compared with reference standards to assign identity and concentration. Method suitability is judged by resolution, precision, and accuracy.
Instrumentation includes a solvent delivery system, an autosampler, a column oven, and one or more detectors. Reversed-phase columns with chemically modified silica are widely used, but normal-phase, ion-exchange, size-exclusion, and affinity modes exist for specific separations. Detectors may rely on ultraviolet absorbance, fluorescence, refractive index, or mass spectrometry. Column temperature, mobile phase composition, and flow rate are adjusted to improve resolution. System pressure is monitored because rising pressure can indicate column blockage or deteriorating packing.
Separation performance depends on particle size, pore size, column length, and the chemistry of the stationary phase. Smaller particles generally improve efficiency but require higher pressure and suitable instrumentation. The mobile phase often contains buffers and organic solvents that influence retention and selectivity. Testing labs select conditions based on the analytes, sample matrix, and required sensitivity. Method development frequently involves screening several columns and solvent mixtures before a final set of conditions is chosen.
This concept is of clinical interest as it is sometimes necessary to reach a certain concentration of a drug that is known to be optimal in order for it to have the required effects on the organism (as occurs if a patient is to be scanned).
=== DPP-4 inhibitor trials === McGuire served on the executive committees of four cardiovascular outcome trials (CVOTs) evaluating DPP-4 inhibitors: SAVOR-TIMI 53 (saxagliptin), TECOS (sitagliptin), CAROLINA (linagliptin), and CARMELINA (linagliptin). He was co-chair of CARMELINA. These trials were designed to establish non-inferiority for major adverse cardiovascular events (MACE). SAVOR-TIMI 53 reported an increased risk of hospitalization for heart failure with saxagliptin.
Grace is an American chemical business based in Columbia, Maryland. It produces specialty chemicals and specialty materials in two divisions: Performance Catalyst Solutions and Material Technologies. Performance Catalyst Solutions markets refining catalysts, polyethylene and polypropylene catalysts and related products and technologies used in petrochemical, refining, and other chemical manufacturing applications. Material Technologies makes specialty materials, including silica-based and silica-alumina-based materials, which are used in commercial products such as coatings and paints, consumer products such as toothpaste, and in chemical process applications, as well as Fine Chemical Manufacturing Services. For much of its early history, Grace's main business was in South America, in maritime shipping, railroads, agriculture, and silver mining, with 30,000 employees in Peru. In the 1950s, Grace began to diversify and grew into a Fortune 100 worldwide conglomerate. After emerging from a prolonged bankruptcy period of 12 years in 2014, the company spun off its other major operating divisions. In 2015, Grace separated into two independent public companies. Its Catalysts and Material Technologies business segments remained in Grace, and what would later become GCP Applied Technologies Inc. held its Grace Construction Products (GCP) and Darex Packaging Technologies businesses. In September 2021, Standard Industries acquired Grace (the Catalysts and Material Technologies business segments).
There is also evidence of increased risk of developing Alzheimer's for those with a higher BMI in women ages 70 and above. While continuous positive airway pressure (CPAP) was not found to significantly improve cognitive performance, it was found to benefit other symptoms like depression, anxiety, etc.
Sources: en.wikipedia.org
The modifications described here cover alterations to the ring structure donated by the fentanyl precursor 4-ANPP. Although another series covered substitutions of hydrogen atoms on the original carbon ring structure, sometimes called functional group additions, this series focuses on the three main modifications to the phenethyl moiety. The first modifications is the removal of the phenethyl moeity from the piperidinyl nitrogen, depicted here as hydrolysis yielding phenethanol. This changes the parent skeletal name to norfentanyl. The second and third modifications are the removal and addition of a methylene moiety internally in the ethyl chain within the greater phenethyl moiety. The removal of a methylene, which shortens the chain by one carbon length, creates the benzylfentanyl structure. The addition of a methylene, which lengthens the chain by one length, creates homofentanyl.
gene trapping A high-throughput technology used to simultaneously inactivate, identify, and report the expression of a target gene in a mammalian genome by introducing an insertional mutation consisting of a promoterless reporter gene and/or a selectable marker flanked by an upstream splice site and a downstream polyadenylated termination sequence.
==== Informal names ==== Informal names for morphine include: cube juice, dope, dreamer, emsel, first line, God's drug, hard stuff, hocus, hows, Lydia, lydic, M, miss Emma, mister blue, monkey, morf, morph, morphide, morphie, morpho, mother, MS, mud, new jack swing (if mixed with heroin), sister, tab, unkie, unkie white, and stuff. MS Contin tablets are known as misties, and the 100 mg extended-release tablets as greys and blockbusters. The speedball can use morphine as the opioid component, which is combined with cocaine, amphetamines, methylphenidate, or similar drugs. Blue Velvet is a combination of morphine with the antihistamine tripelennamine taken by injection.
== Testing procedure == A niacin test strip is similar in appearance to a pH test strip. It is small, thin, rectangular, and white in color. Water is placed onto the culture plate and touched with a test strip for 15–20 minutes inside a small, sterile tube. If excess amounts of niacin are detected, the liquid inside the tube will turn yellow, a positive test. If the liquid in the tube is clear, there are no excess amounts of niacin and the test is negative. A positive niacin test does not necessarily indicate the presence of M. tuberculosis because other Mycobacterium species can test positive for excess niacin. Along with each batch of specimens being tested, a positive control of M. tuberculosis and a negative control with no organism will be included. If the positive control tests negative, there was probably an error with the batch, and likewise for a negative test showing positive. Because lab samples that are determined to be acid-fast bacilli are possibly M. tuberculosis, a biosafety level 3 organism, all niacin tests must be conducted in a biosafety cabinet with a full gown, respirator, gloves, and sealed laboratory to ensure the safety of the laboratory technician performing the test. All tests must also be conducted with sterile technique.
== Differentiation from tolerance == Tolerance, another condition that can arise from prolonged exposure to opioids, can often be mistaken for opioid-induced hyperalgesia and vice versa, as the clinical presentation can appear similar. Although tolerance and opioid-induced hyperalgesia both result in a similar need for dose escalation to receive the same level of effect to treat pain, they are nevertheless caused by two distinct mechanisms. The similar net effect makes the two phenomena difficult to distinguish in a clinical setting. Under chronic opioid treatment, a particular individual's requirement for dose escalation may be due to tolerance, opioid-induced hyperalgesia, or a combination of both. In tolerance, there is a lower sensitivity to opioids, theorized to occur via two major mechanisms: decreased receptor activation (desensitization of antinociceptive mechanisms) and opioid receptor down-regulation (internalization of membrane receptors). In opioid-induced hyperalgesia, sensitization of pronociceptive mechanisms occurs, resulting in a decrease in the pain threshold, or allodynia. In addition, what appears to be opioid tolerance can be caused by opioid-induced hyperalgesia lowering the baseline pain level, thus masking the drug's analgesic effects. Identifying the development of hyperalgesia is of great clinical importance since patients receiving opioids to relieve pain may paradoxically experience more pain as a result of treatment.
Sources: en.wikipedia.org
HPLC testing measures the presence and amount of one or more compounds in a liquid sample. It separates mixture components and records detector responses as peaks, which are compared with reference standards. Results are usually reported as concentrations or relative percentages.
Retention time is the interval between sample injection and the detector response for a given compound. It depends on the compound's interactions with the stationary and mobile phases under set conditions. Matching a retention time to a standard supports tentative identification but is not always unique.
HPLC alone can separate unknown compounds and provide retention times, but it often cannot identify them with certainty. Coupling HPLC to mass spectrometry gives mass information that improves identification. Confirmation usually requires comparison with reference standards or complementary techniques.
It separates components in a liquid sample and measures their amounts using a detector. Results can indicate concentration, purity, or identity based on retention time and detector response. The technique works for mixtures that can be dissolved and filtered.