retention time raises a handful of sensible questions. This page answers them in order, starting with the fundamentals and moving to applications.
Reviewed 2026-07-01. Anything still debated is marked as such rather than presented as settled.
Routine HPLC testing compares a sample result with a calibration curve prepared from known reference standards. Peak area or peak height is plotted against concentration, and the curve is used to estimate unknown amounts. Retention time supports tentative identification when compared with a standard, though mass spectrometry or another confirmatory method may be needed for definitive identification. Pre-run checks verify repeatability, resolution, and peak symmetry before sample analysis. Limits of detection and quantification describe the smallest amounts that can be reliably observed or measured. Sample preparation, filtration, and degassing help prevent column damage and inconsistent results.
High-performance liquid chromatography is an analytical technique that separates components in a liquid sample. A pump moves a liquid mobile phase through a column packed with a solid stationary phase. Compounds interact differently with both phases and travel at different rates, leaving the column at distinct retention times. A detector records these arrivals as peaks on a chromatogram. The resulting pattern supports identification and quantification of substances in mixtures. Modern instruments use high pressure to force solvent through small particles, which improves speed and resolution compared with older low-pressure liquid chromatography methods.
Separation in HPLC depends on the chemistry of the stationary phase, the composition of the mobile phase, and the physical properties of the column. Reverse-phase separations use a nonpolar stationary phase and a polar mobile phase, and they are common for many organic compounds. Ion-exchange, size-exclusion, and normal-phase modes serve other classes of analytes. Gradient elution changes solvent strength over time, while isocratic elution holds it constant. Flow rate, temperature, particle size, and column length all influence peak shape and resolution. Detection may use ultraviolet absorbance, fluorescence, refractive index, or mass spectrometry, depending on the analyte and the required sensitivity.
Laboratories apply HPLC testing across pharmaceutical, food, environmental, and industrial chemistry. The method can measure active ingredients, impurities, additives, preservatives, and degradation products. Sample preparation often includes dilution, filtration, and sometimes extraction or derivatization. The choice of column, mobile phase, pH, temperature, and detector depends on the analytes and matrix. Results are compared with reference standards to assign identity and concentration. Method suitability is judged by resolution, precision, and accuracy.
HPLC testing is not a single fixed procedure; it is a family of separation modes. Reversed-phase, normal-phase, ion-exchange, size-exclusion, and affinity chromatography each suit different analyte properties. Reversed-phase methods dominate because they handle many neutral and moderately polar compounds. Detection can be optical, electrochemical, or mass spectrometric, and the detector dictates what information is available. Coupling with mass spectrometry increases selectivity and enables identification when standards are unavailable. The technique cannot separate every mixture without adjustment.
HPLC testing is an analytical technique used to separate, identify, and quantify components in a liquid sample. It relies on a pressurized mobile phase that carries the sample through a column packed with stationary phase. Different compounds travel at different rates because of interactions with the stationary and mobile phases. The resulting signal versus time is a chromatogram. Peak position indicates identity under specified conditions, while peak area or height relates to amount.
| Property | Value | Notes |
|---|---|---|
| Common abbreviation | HPLC | High-performance liquid chromatography |
| Separation basis | Differential partitioning | Between liquid mobile phase and solid stationary phase |
| Common mode | Reverse phase | Nonpolar column, polar mobile phase |
| Typical detector | UV-Vis absorbance | Widely used for compounds with chromophores |
| Typical column particle size | 2–5 µm | Smaller particles can improve resolution |
Detection commonly uses ultraviolet-visible absorbance, fluorescence, refractive index, or mass spectrometry. Ultraviolet detection depends on molecular chromophores that absorb light at specific wavelengths. Mass spectrometry provides mass information and sensitive quantification, often after electrospray ionization. Before sample batches, performance checks examine resolution, elution time repeatability, peak symmetry, and plate count. Matrix effects and co-elution remain recognized uncertainties; formal validation studies and orthogonal detection help address them. Detector choice depends on analyte properties and required sensitivity.
High-performance liquid chromatography, or HPLC, separates dissolved compounds by passing a liquid mobile phase through a packed column. Components distribute differently between the stationary phase and the moving liquid, so they travel at different speeds and exit at different times. A detector records these eluting bands as peaks, and peak area or height relates to amount. The technique supports testing in pharmaceuticals, foods, environmental samples, and industrial chemicals. Quantification usually depends on calibration with known standards.
Practical HPLC testing depends on careful sample preparation and instrument maintenance. Samples may require filtration, dilution, pH adjustment, or extraction to avoid column damage and matrix interference. Mobile phases are degassed and filtered, and columns are equilibrated before injection. Common problems include peak tailing, baseline drift, ghost peaks, carryover, and co-elution of analytes. Documentation of instrument logs, calibration records, and electronic audit trails supports data integrity and traceability. Ongoing training and routine maintenance help reduce variability between analysts and laboratories.
Quality control laboratories use HPLC to check identity, purity, concentration, and stability of raw materials and finished products. A validated method specifies the column, mobile phase, flow rate, detection wavelength, injection volume, and run time. Samples are prepared and compared against reference standards of known concentration. The resulting chromatogram provides quantitative data, such as assay values and impurity levels. This approach is common in pharmaceutical, food, environmental, and industrial testing where consistent measurements are required.
Regulatory and pharmacopeial texts shape how HPLC testing is performed and documented. The International Council for Harmonisation provides validation guidance, while pharmacopeias publish general chromatography chapters and monographs for specific materials. Accreditation standards such as ISO/IEC 17025 address laboratory competence and traceability. Inspectors may review instrument qualification, analyst training, reference material control, and electronic records. Open questions include how best to validate methods for new complex products and how to handle automated data processing. Laboratories generally resolve these issues through risk assessment, method lifecycle management, and documented scientific justification.
In quality control laboratories, HPLC testing supports batch release, raw material checks, stability studies, and impurity profiling. A validated method defines sample preparation, instrument settings, calibration, and acceptance criteria. Analysts compare results with specifications and investigate out-of-specification outcomes before a batch is approved. Documentation includes chromatograms, integration records, audit trails, and reagent details. Because results influence product decisions, laboratories follow formal quality systems and data integrity rules. The exact tests and limits depend on the material, its intended use, and the applicable regulatory framework.
Method validation examines whether an HPLC procedure is suitable for its intended purpose. Common parameters include accuracy, precision, specificity, linearity, range, detection limit, quantification limit, and robustness. Accuracy describes closeness to a true or accepted value, while precision describes agreement among repeated measurements. Specificity shows whether the method can measure the analyte without interference from related substances. Robustness tests small deliberate changes in flow, temperature, or solvent composition. Validation is not a one-time event; methods may need partial revalidation after changes to instruments, columns, sample handling, or specification limits. Regulatory guidance provides frameworks, but some details remain method-specific.
Validation establishes that a method is suitable for its intended purpose. Typical parameters include accuracy, precision, specificity, linearity, range, limit of detection, limit of quantification, robustness, and stability of standards and samples. Acceptance criteria are defined in advance, and results are documented in a validation report. Regulatory guidance for pharmaceuticals, foods, and environmental testing differs, so the applicable framework must be identified. Ongoing verification uses control samples and trend charts after validation. Method transfer to another laboratory may require partial revalidation.
Routine quality control includes blanks, duplicates, spiked samples, and certified reference materials. Calibration curves are prepared with standards at several concentrations, and the detector response is checked for linearity. Carryover, column aging, mobile phase evaporation, and temperature drift can shift retention times or peak areas. Maintenance such as replacing seals, filters, and columns helps prevent failures. Records of injections, integration, and deviations support traceability. Audits may request raw data and instrument logs for each batch.
Developing an HPLC test begins with defining the analytes, matrix, and required reporting limits. Chemists select a separation mode, column chemistry, mobile phase composition, flow rate, and detection wavelength or mass transition. Experiments then adjust these variables to achieve adequate retention, resolution, and peak shape. System suitability tests confirm that the instrument and method perform consistently before sample analysis. Without suitable resolution, quantitative results may be unreliable. Preliminary runs often use scouting gradients to locate retention windows.
Orthorhombic AmCl2: a = 896.3±0.8 pm, b = 757.3±0.8 pm and c = 453.2±0.6 pm Tetragonal AmBr2: a = 1159.2±0.4 pm and c = 712.1±0.3 pm. They can also be prepared by reacting metallic americium with an appropriate mercury halide HgX2, where X = Cl, Br or I:
== Side effects == Potential side effects of 5-HTP include heartburn, abdominal pain, nausea, vomiting, diarrhea, drowsiness, sexual problems, vivid dreams or nightmares, and muscle problems. Serotonin syndrome can occur. Because 5-HTP has not been thoroughly studied in a clinical setting, possible side effects and interactions with other drugs are not well known. According to the US National Library of Medicine, 5-HTP has not been associated with serotonin syndrome or any serious adverse events in humans. Across multiple studies, 5-HTP has also been reported to not cause any noticeable hematological or cardiovascular changes. 5-HTP had also been associated with eosinophilia, but later studies have not found any causal connection.
In 1972, Hughes sold the tool division of Hughes Tool Company, and reconsolidated his remaining holdings as the Summa Corporation, which included Hughes' property and other businesses. The Aircraft Division became the Hughes Helicopter Division, Summa Corp. That same year, the US Army issued a request for proposals (RFP) for an Advanced Attack Helicopter (AAH). From an initial list of 5 manufacturers Hughes Aircraft's Toolco Aircraft Division (later Hughes Helicopters) and Bell were selected as finalists. In 1975, Hughes' Model 77/YAH-64 was selected over Bell's YAH-63. First flight of a development prototype occurred in 1977. Also in 1975, Hughes engineers at began concept development work of NOTAR. In 1981, Summa's Hughes Helicopter Division was reconstituted as Hughes Helicopters, Inc.. By December, six AH-64A prototypes had been built and the Army had awarded a purchase contract to the company. Production would reach more than 1,100 by 2005. In 1983, the first production model AH-64 rolled off the production line at the company's new Mesa, Arizona facility. That same year, the company was honored by the National Aeronautic Association with the prestigious Collier Trophy. The company also licensed Schweizer Aircraft to produce the Model 300C. In January 1984, Hughes Helicopters, Inc. was sold to McDonnell Douglas by Summa Corporation, under the parent's efforts to streamline its focus and interest in real estate development. McDonnell Douglas paid $470 million for the company and made it a subsidiary.
Among psychotropic drugs, chlorpromazine is known to cause cholestatic hepatitis. Tricyclic antidepressants (imipramine, amitriptyline) and SSRIs (duloxetine) causing cholestasis have also been reported. Anti-inflammatory drugs with cholestatic potential include the immunosuppressant azathioprine, which has been reported to cause fatal cholestatic hepatitis, and the NSAID diclofenac.
Sources: en.wikipedia.org
Sheikh Muszaphar later regarded Mahathir as the 'father of Malaysia's space programme.' At UMNO's general assembly in 2002, he announced that he would resign as prime minister, only for supporters to rush to the stage and convince him tearfully to remain. He subsequently fixed his retirement for October 2003, giving him time to ensure an orderly and uncontroversial transition to his anointed successor, Abdullah Badawi. Mahathir simultaneously pledged that he would not take on an elder statesman role after retirement. During his final year in office, Mahathir introduced the teaching of Mathematics and Science in English (PPSMI) in 2003, believing that it is crucial for Malaysians to remain competitive in a fast-changing world. During the Severe Acute Respiratory Syndrome (SARS) outbreak, Mahathir introduced an RM8 billion stimulus package, contributing to Malaysia's 6.5% economic growth in the third quarter of 2003. The package focused on four main strategies and 90 measures to stimulate economic activity, boost consumption, and encourage investment. On 29 October 2003, the cabinet paid tribute to Mahathir for his invaluable service to the nation as prime minister for the last 22 years. He also received a record-breaking outpouring of public gratitude, marked by a 5.5 km-long banner displaying messages from over 50,000 Malaysians. The following day, Mahathir presented a review of Malaysia's five-year economic plan at Parliament House. Having spent over 22 years in office, Mahathir was the world's longest-serving elected leader when he retired on 31 October 2003.
Association of Firearm and Tool Mark Examiners – International non-profit organization Canadian Identification Society Computer forensics – Branch of digital forensic science Crime science – Study of ways to prevent or reduce crime Diplomatics – Academic study of the protocols of documents (forensic paleography) Epigenetics in forensic science – Overview article Evidence packaging – Specialized packaging for physical evidence Forensic biology – Forensic application of the study of biology Forensic economics Forensic identification – Legal identification of specific objects and materials Forensic materials engineering – Branch of forensic engineering Forensic photography – Art of producing an accurate reproduction of a crime scene Forensic polymer engineering – Study of failure in polymeric products Forensic profiling – Study of trace evidence in criminal investigations Glove prints – Mark left on a surface by a worn glove History of forensic photography International Association for Identification Medical jurisprudence – Branch of science and medicine Marine forensics Outline of forensic science – Overview of and topical guide to forensic science Profiling (information science) – Creation and use of user profiles via data analysis Retrospective diagnosis – Practice of identifying an illness after the death of the patient Rapid Stain Identification Series (RSID) Scenes of crime officer – Officer who gathers forensic evidence for the British police Skid mark – Mark left by any solid which moves against another University of Florida forensic science distance education program
Didanosine (ddI), sold under the brand name Videx among others, is a medication used to treat HIV/AIDS. It is used in combination with other medications as part of highly active antiretroviral therapy (HAART). It is of the reverse-transcriptase inhibitor class. Didanosine was first described in 1975 and approved for use in the United States in 1991.
== Naturally occurring nuclides that are not primordial == Some unstable isotopes which occur naturally (such as 14C, 3H, and 239Pu) are not primordial, as they must be constantly regenerated. This occurs by cosmic radiation (in the case of cosmogenic nuclides such as 14C and 3H), or (rarely) by such processes as geonuclear transmutation (neutron capture by uranium in the case of 237Np and 239Pu). Other examples of common naturally occurring but non-primordial nuclides are isotopes of radon, polonium, and radium, which are all radiogenic daughters of uranium decay and are found in uranium ores. The stable argon isotope 40Ar is actually more common as a radiogenic nuclide than as a primordial nuclide, forming almost 1% of the Earth's atmosphere, which is generated by the electron capture decay of the extremely long-lived radioactive primordial isotope 40K, whose half-life is on the order of a billion years and thus has been generating argon since early in the Earth's existence. (Primordial argon was dominated by the alpha process nuclide 36Ar, which is significantly rarer than 40Ar on Earth.) And the classical decay chains of radiogenic elements derive from the long-lived radioactive primordial nuclides 232Th, 235U, and 238U. These nuclides are described as geogenic, meaning that they are decay or fission products of uranium or other actinides in subsurface rocks. All such nuclides have shorter half-lives than their parent radioactive primordial nuclides.
==== Second tour January 20 to May 16, 1952 ==== Thomas undertook a second tour of the United States in 1952, this time with Caitlin—after she had discovered he had been unfaithful on his earlier trip. They drank heavily, and Thomas began to suffer with gout and lung problems. The second tour was the most intensive of the four, taking in 46 engagements. The trip also resulted in Thomas recording his first poetry to vinyl, which Caedmon Records released in America later that year. One of his works recorded during this time, A Child's Christmas in Wales, became his most popular prose work in America. The original 1952 recording of the book was a 2008 selection for the United States National Recording Registry, stating that it is "credited with launching the audiobook industry in the United States". A shortened version of the first half of The Town That Was Mad was published in Botteghe Oscure in May 1952, with the title Llareggub. A Piece for Radio Perhaps. Thomas had been in Laugharne for almost three years, but his half-play had made little progress since his time living in South Leigh. By the summer of 1952, the half-play's title had been changed to Under Milk Wood because John Brinnin thought the title Llareggub would not attract American audiences. On 6 November 1952, Thomas wrote to the editor of Botteghe Oscure to explain why he hadn't been able to "finish the second half of my piece for you." He had failed shamefully, he said, to add to "my lonely half of a looney maybe-play".
Sources: en.wikipedia.org
Part C states, which were chief commissioners' provinces and some princely states, each governed by a chief commissioner appointed by the President of India. The ten Part C states were Ajmer, Bhopal, Bilaspur, Coorg, Delhi, Himachal Pradesh, Cutch, Manipur, Tripura and Vindhya Pradesh. One Part D state (Andaman and Nicobar Islands) administered by a lieutenant governor appointed by the central government. After the States Reorganisation Act, 1956, Part C and Part D states were combined into a single category of "Union territory". Due to various other reorganisations, only 6 union territories remained:
Arashiro Toshiaki, Ryukyu-Okinawa Rekishi Jinbutsuden, Okinawajijishuppan, 2006 p66 ISBN 978-4-903042-04-6 "Reevaluation of surgical achievements by Tokumei Takamine". Matsuki A. Masui. November 2000; 49(11):1285-9. Japanese. "The secret anesthetic used in the repair of a hare-lip performed by Tokumei Takamine in Ryukyu". Matsuki A. Nippon Ishigaku Zasshi. October 1985 31(4):463-89. Japanese.
=== Marxist criticisms === Adorno posits social totality as an automatic system. According to Horst Müller's Kritik der kritischen Theorie ("Critique of Critical Theory"), this assumption is consistent with Adorno's idea of society as a self-regulating system, from which one must escape (but from which nobody can escape). For him, it was existent but inhuman. Müller argues against the existence of such a system and claims that critical theory provides no practical solution for societal change. He concludes that Jürgen Habermas, in particular, and the Frankfurt School in general, misconstrue Marx.
Gamma-glutamyltransferase is an enzyme that is overexpressed in cancer, and releases the chelator dithiocarbamate from the prochelator developed by Franz's research group, which forms a toxic copper complex. She works on iron chelators that can be used to remove deleterious iron in brain regions impacted by Parkinson's disease without damaging the healthy metal ions. The chelators developed by Franz have no affinity for iron until a mask is released by hydrogen peroxide, releasing a reactive oxygen species that combines with iron to form hydroxyl radicals. Additionally Franz studies copper-binding peptides such as histatin. Histatin binds to copper in vitro, but it is not clear how they interact or how the anti-fungal activity is modified. The Franz group have studied the anti-fungal activity of Histatin-5 against Candida albicans.
== Plot == Jesse (Danny McBride), Judy (Edi Patterson) and Kelvin (Adam DeVine) participate in a rehearsal for the "Aimee-Leigh Birthday Celebration Give-A-Thon", hosted by Baby Billy (Walton Goggins). However, during their attempt to lift up, the Gemstones' jet packs malfunction and ruin part of the set. Billy scolds them and demands that they find Eli, who has gone missing for the past few days, as he is vital to the Give-A-Thon's success. Eli (John Goodman) has moved to Florida, living in a yacht where he drinks alcohol and has sex with strangers. Jesse, Judy and Kelvin arrive to get him to take part in the telethon, but Eli refuses, feeling he needs time to consider what he truly wants in life. Nevertheless, they force him to change his mind after repeating the word "pussy" to annoy him. BJ (Tim Baltz) now attends pole dancing classes, although Judy feels jealous of his female colleagues. Kelvin and Keefe (Tony Cavalero) have embraced their relationship and formed a new church program named "Prism", although Keefe wishes they would finally marry or kiss in public. The Gemstones have also launched "Prayer Pods" to the market, but sales are incredibly low. Billy surprises the family by bringing Lori Milsap (Megan Mullally), Aimee-Leigh's long-time musical partner. She and Eli bond, reminiscing over their experiences with Aimee-Leigh. During the telethon, Eli is amazed upon seeing Lori singing, and has a flirtatious encounter with her backstage.
Sources: en.wikipedia.org
HPLC testing measures the presence and amount of one or more compounds in a liquid sample. It separates mixture components and records detector responses as peaks, which are compared with reference standards. Results are usually reported as concentrations or relative percentages.
Retention time is the interval between sample injection and the detector response for a given compound. It depends on the compound's interactions with the stationary and mobile phases under set conditions. Matching a retention time to a standard supports tentative identification but is not always unique.
HPLC alone can separate unknown compounds and provide retention times, but it often cannot identify them with certainty. Coupling HPLC to mass spectrometry gives mass information that improves identification. Confirmation usually requires comparison with reference standards or complementary techniques.
It measures the presence and amount of one or more compounds in a liquid sample. Separation occurs in a column, and detection produces a signal proportional to concentration. Identification usually requires comparison with a known reference standard under the same conditions.