A practical reference on reference standard: what it is, how it behaves, what the literature reports, and where the honest uncertainties sit.
Reviewed 2026-04-21. Anything still debated is marked as such rather than presented as settled.
Separation performance depends on particle size, pore size, column length, and the chemistry of the stationary phase. Smaller particles generally improve efficiency but require higher pressure and suitable instrumentation. The mobile phase often contains buffers and organic solvents that influence retention and selectivity. Testing labs select conditions based on the analytes, sample matrix, and required sensitivity. Method development frequently involves screening several columns and solvent mixtures before a final set of conditions is chosen.
High-performance liquid chromatography is an analytical technique that separates components in a liquid sample by passing them through a packed column under pressure. A pump delivers a mobile phase at a controlled flow rate, and an injector introduces the sample into the stream. Differences in how analytes partition between the mobile phase and the stationary phase cause them to exit the column at different times. Detection then records a signal proportional to the amount of each separated substance. The resulting chromatogram provides retention times and peak areas for identification and quantification.
Instrumentation includes a solvent delivery system, an autosampler, a column oven, and one or more detectors. Reversed-phase columns with chemically modified silica are widely used, but normal-phase, ion-exchange, size-exclusion, and affinity modes exist for specific separations. Detectors may rely on ultraviolet absorbance, fluorescence, refractive index, or mass spectrometry. Column temperature, mobile phase composition, and flow rate are adjusted to improve resolution. System pressure is monitored because rising pressure can indicate column blockage or deteriorating packing.
Method validation demonstrates that an analytical procedure is suitable for its intended purpose. Typical validation characteristics include accuracy, precision, specificity, linearity, range, limit of detection, limit of quantitation, and robustness. Regulatory guidance from bodies such as the International Council for Harmonisation and the United States Pharmacopeia outlines expectations, though specific criteria depend on the product and method. System suitability tests are run before sample analysis to confirm resolution, peak symmetry, column efficiency, and injection repeatability. Failure of these checks can invalidate a batch of measurements.
Practical HPLC testing depends on careful sample preparation and instrument maintenance. Samples may require filtration, dilution, pH adjustment, or extraction to avoid column damage and matrix interference. Mobile phases are degassed and filtered, and columns are equilibrated before injection. Common problems include peak tailing, baseline drift, ghost peaks, carryover, and co-elution of analytes. Documentation of instrument logs, calibration records, and electronic audit trails supports data integrity and traceability. Ongoing training and routine maintenance help reduce variability between analysts and laboratories.
Quality control laboratories use HPLC to check identity, purity, concentration, and stability of raw materials and finished products. A validated method specifies the column, mobile phase, flow rate, detection wavelength, injection volume, and run time. Samples are prepared and compared against reference standards of known concentration. The resulting chromatogram provides quantitative data, such as assay values and impurity levels. This approach is common in pharmaceutical, food, environmental, and industrial testing where consistent measurements are required.
| Property | Value | Notes |
|---|---|---|
| Separation principle | Differential partitioning | Analytes distribute between mobile and stationary phases. |
| Mobile phase | Liquid solvent mixture | Composition controls retention and selectivity. |
| Stationary phase | Packed column particles | Often chemically bonded silica. |
| Typical detector | UV-Vis or photodiode array | Mass spectrometry is also common. |
| Common synonym | High-performance liquid chromatography | Abbreviated as HPLC. |
Developing an HPLC method begins with defining the purpose, such as quantifying a main component, measuring impurities, or confirming identity. Analysts select separation mode, column, mobile phase, detection, and sample preparation based on analyte properties and matrix. Experiments vary solvent strength, pH, buffer type, and temperature to achieve resolution between critical peaks. The goal is a robust method that produces reliable results across instruments and operators. Method development often involves trial runs and statistical optimization.
Validation demonstrates that a method is suitable for its intended use. Typical performance characteristics include accuracy, precision, specificity, linearity, range, limit of detection, limit of quantitation, and robustness. Regulators and standards organizations provide frameworks, but specific requirements depend on the application and jurisdiction. System suitability tests are run before sample analysis to confirm resolution, peak symmetry, retention time repeatability, and sensitivity. A validated method is not permanently fixed; changes may require partial or full revalidation.
Method validation evaluates accuracy, precision, specificity, linearity, range, detection limit, quantitation limit, and robustness. Regulatory guidance for pharmaceuticals, foods, and environmental testing defines expected documentation and acceptance criteria. Verification confirms that a validated method works in a specific laboratory with its own instruments and reagents. Calibration curves use reference standards with known purity and traceability, while measurement uncertainty is estimated from validation data, control charts, and collaborative studies. The scope of validation depends on the method's intended use.
Routine quality control monitors retention time shifts, baseline noise, system pressure, and peak shape. Trends can reveal column aging, mobile phase preparation errors, detector drift, or sample degradation. Corrective actions may include replacing the column, preparing fresh mobile phase, or recalibrating the detector. Stability testing often uses HPLC to measure parent compound loss and degradation product formation. Open questions remain about how accelerated stability results extrapolate to long-term storage under varied conditions.
Quality control for HPLC testing combines scheduled checks, documented procedures, and review of results. Before sample analysis, system suitability testing confirms that the instrument, column, and method meet predefined criteria. Common criteria include resolution between critical peaks, retention time precision, peak tailing, and theoretical plate count. Failure triggers investigation before results are reported. Records link raw data, calculations, instrument logs, and analyst identity to each batch, supporting audits and repeat analysis.
Routine HPLC testing compares a sample result with a calibration curve prepared from known reference standards. Peak area or peak height is plotted against concentration, and the curve is used to estimate unknown amounts. Retention time supports tentative identification when compared with a standard, though mass spectrometry or another confirmatory method may be needed for definitive identification. Pre-run checks verify repeatability, resolution, and peak symmetry before sample analysis. Limits of detection and quantification describe the smallest amounts that can be reliably observed or measured. Sample preparation, filtration, and degassing help prevent column damage and inconsistent results.
High-performance liquid chromatography is an analytical technique that separates components in a liquid sample. A pump moves a liquid mobile phase through a column packed with a solid stationary phase. Compounds interact differently with both phases and travel at different rates, leaving the column at distinct retention times. A detector records these arrivals as peaks on a chromatogram. The resulting pattern supports identification and quantification of substances in mixtures. Modern instruments use high pressure to force solvent through small particles, which improves speed and resolution compared with older low-pressure liquid chromatography methods.
Separation in HPLC depends on the chemistry of the stationary phase, the composition of the mobile phase, and the physical properties of the column. Reverse-phase separations use a nonpolar stationary phase and a polar mobile phase, and they are common for many organic compounds. Ion-exchange, size-exclusion, and normal-phase modes serve other classes of analytes. Gradient elution changes solvent strength over time, while isocratic elution holds it constant. Flow rate, temperature, particle size, and column length all influence peak shape and resolution. Detection may use ultraviolet absorbance, fluorescence, refractive index, or mass spectrometry, depending on the analyte and the required sensitivity.
=== Blood supply === The sinoatrial node receives its blood supply from the sinoatrial nodal artery. This blood supply, however, can differ hugely between individuals. For example, in most humans, this is a single artery, although in some cases there have been either 2 or 3 sinoatrial node arteries supplying the SA node. Also, the SA node artery mainly originates as a branch of the right coronary artery; however in some individuals it has arisen from the circumflex artery, which is a branch of the left coronary artery. Finally, the SA node artery commonly passes behind the superior vena cava, before reaching the SA node; however in some instances it passes in front. Despite these many differences, there doesn't appear to be any advantage to how many sinoatrial nodal arteries an individual has, or where they originate.
The many-banded krait (Bungarus multicinctus) is the second most venomous krait species known, based on toxinological studies conducted on mice. The venom of the many-banded krait consists of both pre- and postsynaptic neurotoxins (known as α-bungarotoxins and β-bungarotoxins, among others). Due to poor response to antivenom therapy, mortality rates are very high in cases of envenomation – up to 50% of cases that receive antivenom are still fatal. Case fatality rates of the many-banded krait envenoming reach 77–100% without treatment. The average venom yield from specimens kept on snake farms was between 4.6 and 18.4 mg per bite. In another study, the average venom yield was 11 mg (Sawai, 1976). The venom is possibly the most toxic of any Bungarus (krait) species and possibly the most toxic of any snake species in Asia, with LD50 values of 0.09 mg/kg–0.108 mg/kg SC, 0.113 mg/kg IV and 0.08 mg/kg IP on mice. Based on several LD50 studies, the many-banded krait is among the most venomous land snakes in the world. The Taiwan National Poison Control Center reports that the chief cause of death from snakebite during the decade (2002–2012) was respiratory failure, with 80% of these caused by bites from the many-banded krait.
From the east, the East River Tunnels' lines 1 and 2 (the more southerly tubes) can only access tracks 5–17 and are used by most Amtrak and NJ Transit trains, while the East River Tunnels' lines 3 and 4 (the more northerly tubes) can only access tracks 14–21 and are mostly used by LIRR. From the west, the North River Tunnels can access tracks 1–19, while the Empire Connection can only access tracks 1–9 and the LIRR's West Side Yard can only access tracks 10–21. All station tracks are powered by 12 kV overhead wire. Tracks 5–21 also have 750 V DC third rail. Due to the lack of proper ventilation in the tunnels and station, only electric locomotives and dual-mode locomotives are scheduled to enter Penn Station. Diesel-only NJT trains terminate at Hoboken Terminal or Newark Penn Station, and diesel-only LIRR trains terminate at or prior to Long Island City. The established throughput capacity of the tunnels is 24–25 trains per hour in each direction for the North River Tunnels and 20–21 trains per hour in the peak direction for the East River Tunnels. Trains on track 18 open their doors only on the north side (platform 10).
Under intense heat, the electrons in the metal ions or small molecules can be excited. These electrons later return to lower energy states, and release light with a colour spectrum characteristic of the species present. In chemical synthesis, salts are often used as precursors for high-temperature solid-state synthesis. Many metals are geologically most abundant as salts within ores. To obtain the elemental materials, these ores are processed by smelting or electrolysis, in which redox reactions occur (often with a reducing agent such as carbon) such that the metal ions gain electrons to become neutral atoms.
Sources: en.wikipedia.org
Nobody's done that before." In February 2012, the Smithsonian National Museum of American History announced that Ayyadurai had donated "a trove of documents and code" related to EMAIL. Initially, the museum—inaccurately—cited the program as one of the first to include the now common "subject and body fields, inboxes, outboxes, cc, bcc, attachments, and others. He based these elements directly off of the interoffice mail memos the doctors had been using for years, in hopes of convincing people to actually use the newfangled technology." Ayyadurai's claims drew editorial clarifications and corrections, as well as criticism from industry observers. In a followup to its acquisition announcement, the Smithsonian stated that it was not claiming that Ayyadurai had invented email, but rather that the materials were historically notable for other reasons related to trends in computer education and the role of computers in medicine. The Smithsonian statement distinguished Ayyadurai's achievement by noting that historians in the field, "have largely focused on the use of large networked computers, especially those linked to the ARPANET in the early 1970s". The statement observed that Ayyadurai's approach instead "focused on communications between linked computer terminals in an ordinary office situation".
After the break-up of the Soviet Union in 1991, bromantane continued to be researched and characterized but was mainly limited in use to sports medicine (for instance, to enhance athletic performance). In 1996, it was encountered as a doping agent in the 1996 Summer Olympics when several Russian athletes tested positive for it, and was subsequently placed on the World Anti-Doping Agency banned list in 1997 as a stimulant and masking agent. Bromantane was eventually repurposed in 2005 as a treatment for neurasthenia. It demonstrated effectiveness and safety for the treatment of the condition in extensive, large-scale clinical trials, and was approved for this indication in Russia under the brand name Ladasten sometime around 2009.
According to the Council of Europe, the intentional targeting of journalists constitutes a war crime. During the conflict, Reporters Without Borders (RSF) claimed that the Israeli army had deliberately targeted journalists. An RSF investigation said that Israel had targeted journalists in two missile strikes on 13 October 2023 that killed Reuters reporter Issam Abdallah and injured four others. These two strikes, 30 seconds apart, hit a group of seven journalists in southern Lebanon who were reporting on the border fighting between Israel and Hezbollah. In a video, the journalists are seen wearing vests and helmets identifying them as "PRESS". The marking was also present on the roof of their car, which exploded after being hit by the second missile. The Netherlands Organisation for Applied Scientific Research, which tests and analyses munitions and weapons, assisted Reuters by examining the material collected at the site of the explosion and found that a piece of metal was the fin of a 120 mm tank round fired 1.34 km away from the border from a smoothbore tank gun. A February 2024 report by the United Nations Interim Force in Lebanon (UNIFIL) concluded that an Israeli tank killed Abdallah when it fired at "clearly identifiable journalists", and that this broke international law. The report "assessed that there was no exchange of fire across the Blue Line at the time of the incident", with no records of any exchange of fire across the border for the 40 minutes before the tank firing.
Sources: en.wikipedia.org
HPLC separates and detects individual compounds in a liquid sample, producing peaks at characteristic retention times. Peak area or height can be used to estimate concentration when calibrated with known standards. It does not identify unknown compounds with certainty unless additional detectors or reference materials are used.
Pressure drives the liquid mobile phase through a column packed with small particles. Without pressure, flow would be very slow or stop because the packed bed resists liquid movement. Modern pumps maintain a steady flow despite the resistance.
A chromatogram is a plot of detector signal against time after sample injection. Each peak represents a compound or group of compounds eluting from the column. Retention time and peak area are the main measurements read from the plot.
Method validation is the documented process of confirming that an HPLC procedure is suitable for its intended use. It evaluates accuracy, precision, specificity, linearity, range, detection limits, and robustness. Validation criteria depend on the regulatory context and the sample type.